FBS Cable Stripper For Vulcanized Semicond. Layer D10-52mm

Application range : ¸ 10 - 52 mm
Insulation thickness : 0 - 1,5 mm
Suggested application : Vulcanized, extruded, bonded semiconductive layer

• Application range: Ø 10 - 52 mm
• Insulation thickness: 0 - 1,5 mm
• Suggested application: Vulcanized, extruded, bonded semiconductive layer
• Positioning on the cable comparable to a vice system
• Axial feed activation/deactivation device (usable in both directions): Through the stripping operation starting from outside of the cable, 25mm of the semicon layer will not be stripped (as shown in the pictures). By the stripping operation from inside to outside about 6 mm of semicon layer will remain.
• Stripping can be done starting from any position on the cable
• Maximal rotating diameter 200 mm
• Interchangeable blade

Set equipment:

• FBS - cable stripper - 1722 1
• 2,5 mm Allen wrench - 1710 0
• Tube of silicone grease - AG1013
• Rigid resin case - AB17220